Apple Lisa Lisa DAC Installation
LisaGuide and one other contributor
Last updated on Jun 25, 2019
Views: 783
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 12
- Past 30 Days:
- 68
- All Time:
- 783
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
What you need
-
-
-
Follow the Apple Lisa Disassembly Guide to remove the Lisa's real panel.
Ask FixBot
-
-
-
Locate Lisa's expansion slots.
-
Locate expansion slot 2.
-
Pull the metal rod out from slot 2 and rotate 90º clockwise.
-
Slide the Lisa DAC into expansion slot 2.
-
Rotate the metal rod, as described before, 90º counter-clockwise and push in to secure the Lisa DAC.
-
-
-
-
The Lisa DAC software can be found here.
-
Lisa DAC requires MacWorks Plus II.
-
-
To reassemble your device, follow these instructions in reverse order.
