Introduction
Go to step 1 ↓This guide shows the steps for "Krups Type 309".
What you need
Tools
-
-
-
Remove the sticker on the bottom.
-
Release the screw under the sticker.
-
Remove the cover.
Ask FixBot
-
-
-
Pull the power cable out of its routing in the housing.
-
Unscrew the short cable for the lid interlock.
-
-
-
Carefully hold the blade in place with a pair of pliers.
-
Use a screwdriver from underneath to loosen the blade.
-
Unscrew the blade and washer by hand.
-
-
-
-
Carefully pull the motor out.
-
Be careful with the cables while doing so.
-
-
