This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
Introduction
This guide shows you how to separate the screen from the lower module (keyboard) on the why! NS50/1AU.
What you need
-
-
-
Unscrew the screws circled in red.
-
Unscrew the screws circled in blue.
-
Insert the opening pick.
Ask FixBot
-
-
-
-
-
-
Peel off the adhesive strip.
-
Unscrew the 6 screws, following the numerical order.
-
-
-
-
-
-
Unscrew the screws and disconnect the cables outlined in orange.
-
-
-
Lift the clutch hinges.
-
Remove the cables from the lower module.
-
-
Conclusion
To reassemble your device, follow the instructions in reverse order.
