Introduction
This guide explains how to remove the brush case from your Roomba.
What you need
-
-
While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
-
-
-
-
Rotate the Roomba upside-down so the bottom is facing towards you.
-
-
-
Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.
-
-
-
Push on the dirt bin release button, and pull gently.
-
-
-
Use a Phillips #1 screwdriver to loosen the 4 captive screws around the case .
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 13-14, Regan Winter 2014 Member of Cal Poly, Team 13-14, Regan Winter 2014
CPSU-REGAN-W14S13G14
4 Members
32 Guides authored
