Introduction
Use this guide to remove or replace the two screws securing the iPhone 14 Pro display panel.
This guide was created using the A2890 (international) model.
Pentalobe (five-point) screws are a proprietary Apple design, requiring the use of a specialized P2 screwdriver.
What you need
-
-
-
Power off your iPhone before beginning disassembly.
-
Remove the two 6.8 mm-long pentalobe P2 screws at the bottom edge of the iPhone.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Cancel: I did not complete this guide.
3 other people completed this guide.
