iHealth Edge Battery Replacement
Gabrielle Bettegnies and one other contributor
Last updated on Dec 15, 2017
Views: 1.9K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 21
- Past 30 Days:
- 105
- All Time:
- 1,948
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Introduction
Go to step 1 ↓This guide will show you how to replace the battery on the iHealth Edge. You must take the device and remove the two piece that are stuck together using a blow dryer. This will expose the inside of the device to see screen. This is where we will begin to learn how to replace the battery.
What you need
Tools
-
-
-
Lightly heat device with hair dryer for 15 seconds to soften adhesive.
Ask FixBot
-
-
-
Remove polymer cover that is protecting the mother board, it should just come out when two halves are separated.
-
-
-
Use a spudger or plastic opening tool to assist the removal of the motherboard. Pry up on two tabs and the mother board will pop out.
-
-
-
-
You must remove the solder from two wires from the motherboard that are connected to the battery.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
IUPUI, Team S1-G4, Freund Fall 2017 Member of IUPUI, Team S1-G4, Freund Fall 2017
IUPUI-FREUND-F17S1G4
4 Members
36 Guides authored
