fixing air in the lines
Last updated on Sep 13, 2026
Views: 120
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 15
- Past 30 Days:
- 96
- All Time:
- 120
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓today i an going to fix air in the lines with a syringe and a bit of tubing
What you need
-
-
-
open up the printer and set it to copy (it does not mater it just needs to move the printhead to the center) once the print head moves to the middle unplug it
Ask FixBot
-
-
-
unscrew that screw so your met with the second photo and make sure that you take off the clamps so you dont end up like me and snap them
-
-
-
messy part and make sure that your ink tank has 2 lines nothing less other wise your just sucking in more air into the lines
-
-
-
-
1-3 all black pages in b&w mode or nozzle clean in maintenance settings
-
-
And your done
Cancel: I did not complete this guide.
One other person completed this guide.
