Skip to main content

Free Shipping on Domestic Orders $75+

ZCWA BR151 Water Filter Replacement

What you need

  1. ZCWA BR151 Water Filter Replacement, Water Tank: step 1, image 1 of 1
    • Turn off the device.

  2. ZCWA BR151 Water Filter Replacement: step 2, image 1 of 2 ZCWA BR151 Water Filter Replacement: step 2, image 2 of 2
    • Remove the water tank by sliding the latch down with a finger and grasping the bottom of the water tank.

    • Pull it out.

  3. ZCWA BR151 Water Filter Replacement, Water Filter: step 3, image 1 of 3 ZCWA BR151 Water Filter Replacement, Water Filter: step 3, image 2 of 3 ZCWA BR151 Water Filter Replacement, Water Filter: step 3, image 3 of 3
    • Remove the filter holders, on the bottom of the water tank, one at a time by maneuvering the spudger under the flaps of the filter holders.

    • Use the spudger to lift enough of the flap up to pinch it between two fingers.

    • Pull the flap up while pinching it to dislodge the filter holder from the water tank.

  4. ZCWA BR151 Water Filter Replacement: step 4, image 1 of 3 ZCWA BR151 Water Filter Replacement: step 4, image 2 of 3 ZCWA BR151 Water Filter Replacement: step 4, image 3 of 3
    • To extract the cotton filters, push the flaps of the filter holders down.

    • Use the tweezers to pull out the filter.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

1 Guide Comment

How do you get the cotton filters back into the rubber holders ?

Bill - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 10

Past 30 Days: 28

All Time: 657