Introduction
Replacing the battery is a quick and easy fix if your robot exhibits the symptoms shown in the accompanying troubleshooting section.
What you need
-
-
Locate and unscrew the two 15mm screws with a Phillips #2 screwdriver.
Ask FixBot
-
-
-
-
Slide the battery out, and disconnect it from the robot by squeezing the tab on the power cable.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
USF Tampa, Team S2-G3, Nance Spring 2017 Member of USF Tampa, Team S2-G3, Nance Spring 2017
USFT-NANCE-S17S2G3
4 Members
14 Guides authored
