Yamaha YPG-225 Display Replacement
Lonnie Bissmeyer and 4 other contributors
Last updated on Jul 15, 2019
Views: 4.6K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 20
- Past 30 Days:
- 86
- All Time:
- 4,590
Comments: 2
2 comments on steps.
Completed: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 3 4
3 people have favorited (and subscribed to) this guide. Will you be next?
4 people have favorited (and subscribed to) this guide — including you!
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Introduction
Go to step 1 ↓Use this guide to install a replacement keyboard display.
What you need
Tools
-
-
-
-
-
Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.
-
-
-
-
Locate the main circuit board in the middle of the detached face plate.
-
-
-
Use a plastic opening tool or spudger to carefully pry up the beige ribbon connectors and remove the wires from them.
-
Use a slightly upward force as parallel to the ground as possible.
-
Be sure to unplug the smaller ribbon that connects to a different circuit board.
-
-
-
Move the ribbons out of the way, and remove the eight 10mm screws in the middle that hold the circuit board down.
-
Remove the two 12mm screws in the corner of the circuit board.
-
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Cal Poly, Team 2-62, Propen Fall 2012 Member of Cal Poly, Team 2-62, Propen Fall 2012
CPSU-PROPEN-F12S2G62
2 Members
72 Guides authored
