Xbox One Wireless Controller Model 1537 Disassembly
Last updated on Jun 27, 2024
Views: 7.5K
View statistics:
- Past 24 Hours:
- 7
- Past 7 Days:
- 64
- Past 30 Days:
- 255
- All Time:
- 7,467
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 9 10
9 people have marked this guide "completed." Will you be next?
10 people have marked this guide "completed." Including you — great job!
Favorites: 2 3
2 people have favorited (and subscribed to) this guide. Will you be next?
3 people have favorited (and subscribed to) this guide — including you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
What you need
Tools
-
Spudger4.9
-
-
-
Remove the side handles by wedging a spudger in between the front and side panels.
-
To pry the side panel off move the spudger back and forth do this along the entire seam to remove the side panel.
-
-
-
Using a T8 security torxs screwdriver remove the five 10mm screws from the back of the controller.
-
One of the screws is hidden behind the label you can either remove the label or poke a hole through it.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.
