XBOX Controller S Shell Replacement
WyattGripp and 2 other contributors
Last updated on Dec 17, 2025
Views: 576
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 28
- Past 30 Days:
- 113
- All Time:
- 576
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓If your Xbox Controller S shell is cracked, use this guide to replace it. The shell is what protects the circuit board from damage.
What you need
Tools
-
-
-
Remove the seven 9.4 mm screws on the back of the controller using a Phillips #00 screwdriver.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Texas Tech, Team 46-5, Johansen Fall 2025 Member of Texas Tech, Team 46-5, Johansen Fall 2025
TTU-JOHANSEN-F25S46G5
4 Members
48 Guides authored
