WowWee MiP Robot Body Disassembly
Daniel Burkholder and 4 other contributors
Last updated on May 7, 2024
Views: 3.6K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 28
- Past 30 Days:
- 122
- All Time:
- 3,554
Comments: 1
1 comment on steps.
Completed: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
Introduction
Go to step 1 ↓This guide is designed to help users disassemble the body of the WowWee MiP robot. This guide is a prerequisite for other replacement and repair guides.
What you need
Tools
-
-
-
Carefully pull the battery pack from the robot.
-
Remove the batteries from the battery pack.
-
-
-
-
Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.
-
-
-
-
-
Remove the eight 9.3 mm Phillips #1 screws from the back of the robot.
-
-
-
Tool used on this step:Tweezers$4.99
-
Using precision tweezers, disconnect the following three bundles of wires:
-
Connecting the battery pack to the motherboard.
-
Connecting the power switch to the motherboard.
-
Connecting the speaker to the motherboard.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
USF Tampa, Team 3-4, Wollert Spring 2016 Member of USF Tampa, Team 3-4, Wollert Spring 2016
USFT-WOLLERT-S16S3G4
4 Members
60 Guides authored
