What you need
-
-
There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.
-
-
-
Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver.
-
-
-
-
Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
Linn Benton Community College, Team S1-G5, Johnson Fall 2018 Member of Linn Benton Community College, Team S1-G5, Johnson Fall 2018
LBCC-JOHNSON-F18S1G5
4 Members
10 Guides authored
3 Guide Comments
Why do you have to disconnect the battery before changing the wheel? Can you not just turn off the power and change it?
зачем снимать акб?
замена или снятие колес происходит при простом отключении устройства обычным выключателем.
Heads up it is really hard to turn
