Wen 2307 Motor Replacement
Joshua Bowery and 3 other contributors
Last updated on May 23, 2016
Views: 1.4K
View statistics:
- Past 24 Hours:
- 12
- Past 7 Days:
- 38
- Past 30 Days:
- 117
- All Time:
- 1,394
Comments: 2
1 comment on steps, 1 guide comment.
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓If the device doesn't rotate, the motor could be bad. Use this guide to replace it.
What you need
Tools
-
-
-
While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.
-
-
-
To remove the front panel, pry the device apart while holding the device with the other hand.
-
-
-
-
Remove the connected wiring from the circuit board.
-
-
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
USF Tampa, Team 12-1, Eyestone Spring 2016 Member of USF Tampa, Team 12-1, Eyestone Spring 2016
USFT-EYESTONE-S16S12G1
4 Members
72 Guides authored
1 Guide Comment
All very well and good, but it’s impossible to buy the motor parts to replace…
