Wen 2307 Front Panel Replacement
Sergio Palacio and 4 other contributors
Last updated on May 23, 2016
Views: 1.4K
View statistics:
- Past 24 Hours:
- 5
- Past 7 Days:
- 19
- Past 30 Days:
- 97
- All Time:
- 1,439
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide is mandatory in order to replace other parts of your rotary tool.
What you need
Tools
-
-
-
While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.
-
-
-
-
To remove the front panel, pry the device apart while holding the device with the other hand.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
USF Tampa, Team 12-1, Eyestone Spring 2016 Member of USF Tampa, Team 12-1, Eyestone Spring 2016
USFT-EYESTONE-S16S12G1
4 Members
72 Guides authored
