Walker WP3208LCD Stuck In Standby
techi60 and 3 other contributors
Last updated on Aug 6, 2024
Views: 4.5K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 22
- Past 30 Days:
- 146
- All Time:
- 4,495
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 28 29
28 people have marked this guide "completed." Will you be next?
29 people have marked this guide "completed." Including you — great job!
Favorites: 9 10
9 people have favorited (and subscribed to) this guide. Will you be next?
10 people have favorited (and subscribed to) this guide — including you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓3 x capacitors need replacing in this TVs should you find its stuck in standby.
You should notice they are bulging, 2 x 4700uF 6.3v & 1 x 100uF 50v. Highlighted in red on picture attached, hope it helps someone out.
What you need
Tools
-
-
-
3 x capacitors need replacing in this TVs should you find its stuck in standby.
-
You should notice they are bulging, 2 x 4700uF 6.3v & 1 x 100uF 50v.
-
Highlighted in red on picture attached, hope it helps someone out.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
28 other people completed this guide.
