Introduction
Use this guide to replace the blade on your device.
What you need
-
-
-
Unscrew the two 3.8 mm Phillip head screws located on the blade using a Phillip's #0 screwdriver.
Ask FixBot
-
-
-
-
Unscrew the 6.2 mm Phillip head screw using a Phillip's #1 screwdriver and remove the blade.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
USF Tampa, Team S14-G5, Boczar Fall 2017 Member of USF Tampa, Team S14-G5, Boczar Fall 2017
USFT-BOCZAR-F17S14G5
2 Members
60 Guides authored
