Introduction
This guide provides instructions for removal of the glass lens cover on the front of the camcorder's water proof case. There are small screws and a glass part in this repair, so have a clean work space and keep the case on a flat surface to avoid losing screws or dropping the glass lens cover.
What you need
-
-
-
Place waterproof case on flat surface, with the lens cover facing up.
Ask FixBot
-
-
-
-
While holding the black lens cover trim tight to the case, flip the case over so that the lens cover is rested on your work surface.
-
-
-
Apply pressure to the lens cover with your thumb, and use your other fingers to pull up on the case, separating the lens and lens trim from the case.
-
-
-
There is a small plastic key on the black bezel that aligns it to the case. Be sure to line this up during reassembly.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
IUPUI, Team 54-6, Wilson Spring 2016 Member of IUPUI, Team 54-6, Wilson Spring 2016
IUPUI-WILSON-S16S54G6
3 Members
45 Guides authored
1 Guide Comment
Hello, do you know where I can acquire a replacement water proof case for my Vivitar DVR 787 HD action camcorder?
