VanMoof S3 Front LED Light Disassembly
Maarten and 2 other contributors
Last updated on Oct 9, 2024
Views: 2.2K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 16
- Past 30 Days:
- 104
- All Time:
- 2,159
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓The front led light consists of 6 parts:
- The housing with the connected led ring print and the connected led main led
- A heatsink with copper attachment to the frame of the bike for cooling
- The front cap
- The mirror
- A large plastic ring to seal the mirror
- A small ring to seal the large plastic ring.
No glue was used between parts. The large plastic ring is fixated by a rubber coating.
What you need
Tools
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
