Skip to main content

Free Shipping on Domestic Orders $75+

Turtle Beach Pure Air Bottom Cover Replacement

What you need

  1. Turtle Beach Pure Air Bottom Cover Replacement, Bottom Cover: step 1, image 1 of 2 Turtle Beach Pure Air Bottom Cover Replacement, Bottom Cover: step 1, image 2 of 2
    • Power off the mouse by moving the power switch to the center.

    Ask FixBot

    Add Comment

  2. Turtle Beach Pure Air Bottom Cover Replacement: step 2, image 1 of 2 Turtle Beach Pure Air Bottom Cover Replacement: step 2, image 2 of 2
    • Peel back the mouse feet.

    • Remove the three 1.6mm screws using a JIS #000 screwdriver.

    • Remove the single 1.6mm screws using remove using a 1.3 mm hex screwdriver.

    Ask FixBot

    Add Comment

  3. Turtle Beach Pure Air Bottom Cover Replacement: step 3, image 1 of 2 Turtle Beach Pure Air Bottom Cover Replacement: step 3, image 2 of 2
    • Carefully remove the bottom cover of the mouse.

    • Be cautious of the cable connecting the bottom cover to the rest of the mouse.

    Ask FixBot

    Add Comment

  4. Turtle Beach Pure Air Bottom Cover Replacement: step 4, image 1 of 3 Turtle Beach Pure Air Bottom Cover Replacement: step 4, image 2 of 3 Turtle Beach Pure Air Bottom Cover Replacement: step 4, image 3 of 3
    • Disconnect the ribbon cable securing the upper shell to the motherboard.

    • Lift the locking clip to release the cable from its connector.

    Ask FixBot

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 44

All Time: 111