Turtle Beach PX22 Speaker Replacement
James de Iturrondo and 4 other contributors
Last updated on Jan 12, 2023
Views: 4.4K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 21
- Past 30 Days:
- 100
- All Time:
- 4,443
Comments: 2
2 guide comments.
Go to guide commentsCompleted: 6 7
6 people have marked this guide "completed." Will you be next?
7 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓This guide shows how to replace an ineffective or broken speaker in a Turtle Beach PX22 headset. Soldering skills are needed for this job.
What you need
Tools
-
-
-
Use your fingers to peel off ear cushion by pinching and pulling off the leather.
Ask FixBot
-
-
-
-
Use a Phillips #00 head screwdriver to remove the three screws located around the speaker (9/32 in length, 1/8 inch head).
-
The housing will come loose. Take note of the position of the wires connected to the speaker.
-
-
Cancel: I did not complete this guide.
6 other people completed this guide.
Team
UMass Dartmouth, Team 3-1, Duarte Spring 2015 Member of UMass Dartmouth, Team 3-1, Duarte Spring 2015
UMASSD-DUARTE-S15S3G1
4 Members
48 Guides authored
2 Guide Comments
Does the speaker driver separate from the surrounding plastic disk, so it can be replaced with a like-sized driver, or is the driver plus mounting plate assembly sold as a replacement part?
