Skip to main content

Free Shipping on Domestic Orders $75+

Trek Neko Bike Brake Pad Replacement

What you need

    1. Trek Neko Bike Brake Pad Replacement, Bike Brake Pad: step 1, image 1 of 2 Trek Neko Bike Brake Pad Replacement, Bike Brake Pad: step 1, image 2 of 2
      • Squeeze the two brake arms together.

      • Angle the brake noodle down.

      • Push the quick release down to release the brake noodle.

      Ask FixBot

      Add Comment

    2. Trek Neko Bike Brake Pad Replacement: step 2, image 1 of 1
      • Flip the bike over so that the seat is on the ground.

      Ask FixBot

      Add Comment

    3. Trek Neko Bike Brake Pad Replacement: step 3, image 1 of 3 Trek Neko Bike Brake Pad Replacement: step 3, image 2 of 3 Trek Neko Bike Brake Pad Replacement: step 3, image 3 of 3
      • Open the quick release lever on the bike wheel.

      • Rotate the lever in a counter clockwise direction to loosen the wheel.

      • Remove the wheel from the bike frame.

      Ask FixBot

      Add Comment

    4. Trek Neko Bike Brake Pad Replacement: step 4, image 1 of 2 Trek Neko Bike Brake Pad Replacement: step 4, image 2 of 2
      • Loosen the locking bolt on the brake pad with a 5 mm Allen wrench.

      • Remove the locking bolt, washers, and brake pad from the brake pad housing.

      Ask FixBot

      Add Comment

    5. Trek Neko Bike Brake Pad Replacement: step 5, image 1 of 2 Trek Neko Bike Brake Pad Replacement: step 5, image 2 of 2
      • Insert the new brake pad.

      • Insert the washers.

      • Insert the locking bolt.

      Ask FixBot

      Add Comment

    6. Trek Neko Bike Brake Pad Replacement: step 6, image 1 of 2 Trek Neko Bike Brake Pad Replacement: step 6, image 2 of 2
      • Tighten the brake pad locking bolt bolt clockwise until it is finger tight.

      • Tighten the bolt with a 5 mm Allen wrench.

      Ask FixBot

      Add Comment

    7. Trek Neko Bike Brake Pad Replacement: step 7, image 1 of 3 Trek Neko Bike Brake Pad Replacement: step 7, image 2 of 3 Trek Neko Bike Brake Pad Replacement: step 7, image 3 of 3
      • Reinsert the wheel.

      • Tighten the bolt on the wheel until it is finger tight.

      • Center the wheel in the frame.

      • Close the quick release lever to secure the wheel.

      Ask FixBot

      Add Comment

    8. Trek Neko Bike Brake Pad Replacement: step 8, image 1 of 2 Trek Neko Bike Brake Pad Replacement: step 8, image 2 of 2
      • Place the bike right side up.

      Ask FixBot

      Add Comment

    9. Trek Neko Bike Brake Pad Replacement: step 9, image 1 of 3 Trek Neko Bike Brake Pad Replacement: step 9, image 2 of 3 Trek Neko Bike Brake Pad Replacement: step 9, image 3 of 3
      • Insert the brake noodle into the quick release lever.

      • Angle the quick release lever upwards so that the brake noodle clicks into place.

      Ask FixBot

      Add Comment

    10. Trek Neko Bike Brake Pad Replacement: step 10, image 1 of 2 Trek Neko Bike Brake Pad Replacement: step 10, image 2 of 2
      • Squeeze the brakes to check proper fitment.

      • Tighten or loosen the quick release bolt on the brake arms to adjust based on preference.

      Ask FixBot

      Add Comment

Conclusion

With properly installed brake pads, you can now safely ride your bike!

Cancel: I did not complete this guide.

2 other people completed this guide.

Camille Nikaido

Member since: 02/02/23

181 Reputation

1 Guide authored

Team

UC Davis, Team 1-9, Andersen Winter 2023 Member of UC Davis, Team 1-9, Andersen Winter 2023

UCD-ANDERSEN-W23S1G9

3 Members

1 Guide authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 29

Past 30 Days: 138

All Time: 1,400