TomTom XXL 540 Battery Replacement
Mike Sollars and 6 other contributors
Last updated on Mar 29, 2023
Views: 5.8K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 30
- Past 30 Days:
- 101
- All Time:
- 5,751
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 5 6
5 people have marked this guide "completed." Will you be next?
6 people have marked this guide "completed." Including you — great job!
Favorites: 5 6
5 people have favorited (and subscribed to) this guide. Will you be next?
6 people have favorited (and subscribed to) this guide — including you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide's details are missing. Help users by adding tools, difficulty, or time.
What you need
Tools
-
-
-
Peel back the sticker on the bottom of the device to reveal the two screws.
Ask FixBot
-
-
-
Wedge the flat head of the screwdriver into the edge of the device. Gently lift the screen from the cover.
-
-
-
-
Identify the green motherboard. Unscrew the three screws holding the board in place.
-
-
-
Transfer the green motherboard back into the back plate and secure it with the 3 screws.
-
-
-
Reconnect the yellow ribbon cable and connect the screen and back plate back together.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Team
WRI115, Team 1-1, Ruszkiewicz Spring 2013 Member of WRI115, Team 1-1, Ruszkiewicz Spring 2013
WRI115-RUSZKIEWICZ-S13S1G1
4 Members
36 Guides authored
1 Guide Comment
Very similar for the 4FL60 and 6000, except in :
Step 1 the screws are visible without removing any stickers
Step 4 hint: to release the ribbon, each end of the white bar has a self-sprung clip to ease away, try not to break them. And for the models above there is a small cable plug to unclip
Step 5 there are 5 screws holding the motherboard
Step 6 it is necessary to unclip plugs for the battery and speaker leads
and vice versa for reassembly
