Toguard C200 Camera Lens Replacement
David Estrada and 2 other contributors
Last updated on Dec 29, 2023
Views: 361
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 6
- Past 30 Days:
- 58
- All Time:
- 361
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs More Images
A few more images would make this guide's procedures crystal clear.
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓This guide is made to show you how to replace an old, broken, or dirty lens from the Toguard C200 model. This will halp your camera be able to film in 4K again and help you have better quality while on the road.
What you need
Tools
-
-
-
Use a suction handle to remove the screen from the camera.
-
Use an opening tool to pry off the bezel.
Ask FixBot
-
-
-
Lift the display assembly to the side, with care not to damage the ribbon cable.
-
Remove the four Phillips screws.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
University of North Texas, Team 3-2, Coppersmith Fall 2023 Member of University of North Texas, Team 3-2, Coppersmith Fall 2023
UNT-COPPERSMITH-F23S3G2
4 Members
48 Guides authored
