Toaster Oven Toasting Knob Replacement
Alissa Mell and 4 other contributors
Last updated on Jan 24, 2019
Views: 2.6K
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 21
- Past 30 Days:
- 108
- All Time:
- 2,641
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide will teach you how to properly disassemble a Toastmaster toaster over and replace the toasting knob. Before you begin, clean out your toaster oven and make sure it is off and unplugged.
What you need
Tools
-
-
-
Remove the two 4mm by 8mm screws from the back of the toaster oven.
Ask FixBot
-
-
-
Remove the four 4mm by 8mm screws from the black supports from the base of the toaster oven.
-
Take the two supports off of the bottom.
-
-
-
-
Grip the sides of the metal cover and lift the cover up off the toaster oven top.
-
-
-
The knob is missing in the first picture.
-
Push the knob into the hole.
-
The knob is now back in place in the last picture.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Michigan Tech, Team S5-G25, Galliah Fall 2017 Member of Michigan Tech, Team S5-G25, Galliah Fall 2017
MTU-GALLIAH-F17S5G25
1 Member
12 Guides authored
