Introduction
When your calculator's display turns on and right back off, it is time for a new battery. Replacing the battery for the TI-15 will take approximately less than 10 minutes to get you back in business. This guide will show you step-by-step the replacement for a TI-15 battery.
What you need
-
-
With a P000 screwdriver, loosen the four 1mm Phillips head screws and set them aside.
Ask FixBot
-
-
-
With an iFixit opening tool, pry apart a total of 3 notches on the top and bottom of the calculator.
-
-
-
-
Using the iFixit opening tool , slide underneath the battery cover until the battery comes out.
-
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
University of Memphis, Team 4-1, Baddour Fall 2016 Member of University of Memphis, Team 4-1, Baddour Fall 2016
UM-BADDOUR-F16S4G1
2 Members
1 Guide authored
1 Guide Comment
The guide says to use a P000 screwdriver but the tool linke is a P0
