Tegra Note 7 Disassembly
Calvin Brice and one other contributor
Last updated on May 22, 2019
Views: 2K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 6
- Past 30 Days:
- 28
- All Time:
- 1,990
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide's details are missing. Help users by adding tools, difficulty, or time.
What you need
Tools
-
-
-
Completely power down device.
-
Remove stylus, sd card (if you have one), and case adaptor from device.
-
Insert thin tool (I used a knife) into the seam around the edges of the device and gently pry back cover off. It is held on only by clips but will require carefulness to avoid damage.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
1 Guide Comment
video of the tear down?
list of parts with part not required?
