Tatung TAC-6G Heating Element Replacement
John David Mitchell and 3 other contributors
Last updated on Jan 27, 2025
Views: 5.8K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 29
- Past 30 Days:
- 135
- All Time:
- 5,817
Comments: 8
1 comment on steps, 7 guide comments.
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓The rice cooker contains a heating element responsible for heating and cooking the rice while it is turned on. In this guide we will show how to expose the heating element of the Tatung TAC-6G rice cooker and replace it.
What you need
Tools
-
-
-
Remove all four of the 15mm Phillips screws from all four of the brackets that hold the heating element in place
-
-
-
Using your hands, remove the heating plate that is on top of heating element.
-
-
-
-
Remove the 7mm Phillips screw that holds the white wire connected to the heating element.
-
-
-
Remove the 7mm Phillips screw that holds the white & maroon wires connected to the heating element.
-
-
-
Using, your hands, take out the heating element and replace it with a new one.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
University of Alabama, Team 1-6, Sydow campbell Spring 2016 Member of University of Alabama, Team 1-6, Sydow campbell Spring 2016
UA-SYDOW CAMPBELL-S16S1G6
4 Members
36 Guides authored
7 Guide Comments
where can I buy this heating element? Thanks.
where to buy parts is the problem!!
not sell tools here but parts, it’s easy to repair but parts is the problem
heat elements can be purchased in Taiwan. if you can read Chinese.
