SteelSeries Apex 3 TKL LED Panel Replacement
Nicholas Medeiros and one other contributor
Last updated on Jun 14, 2024
Views: 865
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 12
- Past 30 Days:
- 69
- All Time:
- 865
Comments: 4
4 comments on steps.
Completed: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs More Images
A few more images would make this guide's procedures crystal clear.
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓In this guide you will learn how to replace the LED backlighting on your keyboard. This guide will help you if your keyboard is not lighting up and or something may have spilt and damaged the LEDs.
What you need
Tools
-
-
-
Spudger4.9
-
-
-
Use the iFixit opening pick to pry open the back panel by running it along the edges of the keyboard.
-
-
-
-
Release the ribbon wire connections using the metal spudger which has a more rigid tip for undoing the clips.
-
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UMass Dartmouth, Team 1-3, Santin Spring 2024 Member of UMass Dartmouth, Team 1-3, Santin Spring 2024
UMASSD-SANTIN-S24S1G3
3 Members
60 Guides authored
