Sony RM-LVR1 Battery Replacement
Dylan Greenwald and 3 other contributors
Last updated on Dec 11, 2017
Views: 2.1K
View statistics:
- Past 24 Hours:
- 5
- Past 7 Days:
- 19
- Past 30 Days:
- 107
- All Time:
- 2,143
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓In our this guide, we will demonstrate how to replace the battery for the SONY RM-LVR1. This procedure consists of 3 simple steps. For optimal performance, fully charge the newly installed battery before use.
What you need
Tools
-
Spudger4.9
-
-
-
Use a Phillips #00 screwdriver to remove the four (4) screws on the back of the device.
-
If the screws strips or is previously stripped, refer to the stripped screw repair guide.
Ask FixBot
-
-
-
Battery is the rectangular and silver object in the center of device.
-
Remove battery with finger by prying at the rear.
-
If unable to remove battery, pry out using spudger.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
Eastern Washington University, Team S2-G2, Crane Fall 2017 Member of Eastern Washington University, Team S2-G2, Crane Fall 2017
EWU-CRANE-F17S2G2
3 Members
36 Guides authored
