What you need
-
-
Slide the battery latch down the side of the camera with your hands.
-
The latch will automatically pop open.
Ask FixBot
-
-
-
-
Remove the four 3.0mm Phillips #000 screws on the top of the camera with the phillips screwdriver.
-
Remove the additional four 3.0mm Phillips #000 screws on the bottom of the camera.
-
-
-
Once the screws are removed, slowly remove the back casing from the rest of the camera.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 17-25, Amido Spring 2012 Member of Cal Poly, Team 17-25, Amido Spring 2012
CPSU-AMIDO-S12S17G25
4 Members
14 Guides authored
