Introduction
If you have broken the outer panels of your DSC-W830, do not worry. This guide will take you through the correct steps of remove both the front and back panels.
What you need
-
-
-
-
Remove the six 3.5mm Phillips #000 screws.
-
Rotate the lock away from the camera.
-
-
-
Remove the two plastic spacers between the front and the back panels.
-
Carefully remove the back panel.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
USF Tampa, Team 17-1, Blackwell Fall 2016 Member of USF Tampa, Team 17-1, Blackwell Fall 2016
USFT-BLACKWELL-F16S17G1
4 Members
12 Guides authored
