Introduction
This is a guide to remove the front panel assembly of the Sony BDP S3500.
Be sure to review the troubleshooting guide, as most of the time the problems are due malfunctioning software rather than it being a hardware issue.
This guide will show you how to safely remove the front panel assembly without damaging the other components.
What you need
-
-
-
Use the Phillips #2 screwdriver to remove the two 9mm screws located on the back of the device.
Ask FixBot
-
-
-
-
Slide the top panel off towards the back of the device.
-
Remove the top panel.
-
-
-
Unclip the plastic tags from the bottom of the device.
-
Unclip the plastic tags from the sides of the device.
-
Slide the front panel off.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
York University, Team S8-G4, Turner Winter 2020 Member of York University, Team S8-G4, Turner Winter 2020
YORK-TURNER-W20S8G4
4 Members
60 Guides authored
