Sony Alpha NEX-C3 Back Panel Replacement
Jonathan Chen and 3 other contributors
Last updated on Dec 20, 2017
Views: 1.5K
View statistics:
- Past 24 Hours:
- 5
- Past 7 Days:
- 24
- Past 30 Days:
- 106
- All Time:
- 1,532
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓The back panel covers internal components. This guide will help remove it in order to access those components.
What you need
Tools
-
-
-
Use a Phillips head 000 screwdriver to remove the 4.0mm screw at the side opposite of the USB port.
Ask FixBot
-
-
-
Use a Phillips head 000 screwdriver to remove the three 4.0mm screws on the bottom of the camera.
-
-
-
Tilt up the LCD screen.
-
Use a Phillips head 000 screwdriver to remove the two coarse 4.0mm screws near the bottom of the camera.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
UC Santa Barbara, Team S1-G1, Weedon Fall 2017 Member of UC Santa Barbara, Team S1-G1, Weedon Fall 2017
UCSB-WEEDON-F17S1G1
3 Members
72 Guides authored
