Sony Alpha ILCE-6000 E-mount Replacement
Yirga Yilma and 2 other contributors
Last updated on May 25, 2017
Views: 5.5K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 33
- Past 30 Days:
- 145
- All Time:
- 5,498
Comments: 2
2 guide comments.
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓If there is a problem mounting the lens onto your Sony Alpha ILCE-6000 , this guide will help you replace the E-mount ring.
What you need
Tools
-
-
-
Use the finger, press and hold the release black circle button ( on the bottom ) next to the lens on the front of the camera.
-
-
-
Using the left hand or the right hand to hold the camera body, other hand twist the lens counterclockwise and pull it off.
-
-
-
-
Take a Philips head 00 screw to remove the four of the 5.1mm screws located on the E-mount.
-
-
-
-
After removing the screws, pull off the E-mount metal ring gently and wiggle it until its free.
-
Remove the plastic ring located under the metal ring.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Team
UW Tacoma, Team 1-4, Rose Winter 2017 Member of UW Tacoma, Team 1-4, Rose Winter 2017
UWT-ROSE-W17S1G4
4 Members
60 Guides authored
