Skil 88 Gears Replacement
Last updated on Jul 31, 2026
Views: 2.6K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 15
- Past 30 Days:
- 108
- All Time:
- 2,599
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 5 6
5 people have favorited (and subscribed to) this guide. Will you be next?
6 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓Is your motor running but the drill is not turning? Replace those gears to start providing torque to your drill bit.
What you need
Tools
-
-
-
On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.
Ask FixBot
-
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 5-17, Maness Fall 2010 Member of Cal Poly, Team 5-17, Maness Fall 2010
CPSU-MANESS-F10S5G17
3 Members
84 Guides authored
