Introduction
Is your skateboard veering off in the wrong direction or are you not going in a straight path? Then it’s time to replace the hanger of your skateboard. This guide will teach you how to disassemble & replace a skateboard hanger if it's damaged or broken.
What you need
-
-
Using the T-tool, unscrew the nut securing the wheel and remove it, setting it and the wheel aside.
Ask FixBot
-
-
-
Using the T-Tool, unscrew the Kingpin nut, washer and top bushing so that the hanger itself can be taken off.
-
-
-
-
Pull straight up to remove the hanger. Remove the lower bushing and the lower cup washer just to check on the riser.
-
-
-
To reassemble, take the lower cup washer, then the lower bushing and put it on the kingpin. Next, set the replacement hanger on top of the lower bushing.
-
-
-
After the hanger is added, put the the top bushing, the top cup washer and then the Kingpin nut back.
-
-
-
After the kingpin nut is secured, take your T-Tool and add the wheels back onto and secure them in place.
-
To reassemble your device, follow these instructions in reverse order.
Team
University of Advancing Technology, Team S1-G13, Beam Summer 2020 Member of University of Advancing Technology, Team S1-G13, Beam Summer 2020
UAT-BEAM-SU20S1G13
1 Member
1 Guide authored
