Sigma 24-70 Disassembly
Last updated on Jul 1, 2024
Views: 4.5K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 30
- Past 30 Days:
- 154
- All Time:
- 4,545
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 11 12
11 people have marked this guide "completed." Will you be next?
12 people have marked this guide "completed." Including you — great job!
Favorites: 6 7
6 people have favorited (and subscribed to) this guide. Will you be next?
7 people have favorited (and subscribed to) this guide — including you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓1°/ Remove the 4 screws on the bottom (take care because to one, the blue screw, of them is shorter than others).
What you need
Tools
-
-
-
1°/ Remove the 4 screws at the bottom (take care because to one of them, blue screw, is shorter than the others)
Ask FixBot
-
-
-
Remove the 4 screws around the steel ring in order to disassemble the captor (blue area) and the plastic ring (red area) which is insert inside the steel ring and behind the captor
-
-
-
-
Remove the steel ring (red area) due to a vertical translation (take care with the vertical sheet, in green area metal, which is used to open the diaphragm)
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
11 other people completed this guide.
