Introduction
The front wheel on the Shark RV912 EZ allows the robot to pivot and navigate smoothly across floors. If the wheel becomes jammed, worn down, or fails to rotate freely, the robot may drag, veer off course, or stop moving. This guide will show you how to remove and replace the front wheel safely and correctly.
What you need
-
-
-
-
Slide a rubber spudger under the tire and lift up until a click sounds or the axle releases.
-
Once the wheel lifts out of the pocket, pull it out by hand.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Team
Texas Tech, Team 37-6, Allen Fall 2025 Member of Texas Tech, Team 37-6, Allen Fall 2025
TTU-ALLEN-F25S37G6
3 Members
60 Guides authored
