Seiko Strap Adjustment
Dean Gadberry and one other contributor
Last updated on Jan 11, 2026
Views: 2.2K
View statistics:
- Past 24 Hours:
- 10
- Past 7 Days:
- 87
- Past 30 Days:
- 325
- All Time:
- 2,175
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 5 6
5 people have marked this guide "completed." Will you be next?
6 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓This guide goes over the link removal and installation process for the seiko 5 strap: M10E-B-I
-
-
-
Note the arrow direction on each link.
-
Note the orientation of each pin upon removal.
Ask FixBot
-
-
-
Push pins out in the direction of link arrows.
-
Use either a strong tweezer or P2 bit.
-
avoid scratching by putting an old T-shirt down on your work surface.
-
expect to push hard. Pins go out in the direction of the arrow on the link.
-
-
-
Pull pins out slowly.
-
Note the orientation of each pin.
-
Expect the watch to fall apart.
-
-
-
Push pins opposite direction of link arrows to insert.
-
This may require a lot of force.
-
Brace your workspace and use soft linens to avoid scratches.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
