Sega Master System Model 2 Disassembly
Krisander 1998 and 2 other contributors
Last updated on Apr 17, 2019
Views: 4K
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 29
- Past 30 Days:
- 137
- All Time:
- 4,047
Comments: 3
3 guide comments.
Go to guide commentsCompleted: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓In this guide we dissassemble the Sega Master System II
What you need
Tools
Video Overview
-
-
-
Remove the 5 screws (3 at the back and 2 on the front)
-
Remove the screw at the side (this screws is different then the other 5 so remember to put them away from the other 5 screws since they are similar)
-
This screw is for the rf shield under for the voltage regulator under this bigger rf shield, its not needed to remove that screw
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Screenshots taken from a video by Global Garage
Cancel: I did not complete this guide.
3 other people completed this guide.
3 Guide Comments
This is in the wrong section.
Nope, its in the Sega Master System area.
Not a Master System
