Introduction
The purpose of this replacement guide is to remove the Sega plastic casing to expose the internal content for further repair.
What you need
-
-
-
Using a Phillips head screwdriver remove six screws from the bottom of the console.
-
The six screws are marked.
Ask FixBot
-
-
-
Remove the two screws that attach the Genesis' connector to the rest of the console.
-
The two screws are marked in the diagram.
-
-
-
To reassemble the device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 5-14, Maness Fall 2010 Member of Cal Poly, Team 5-14, Maness Fall 2010
CPSU-MANESS-F10S5G14
4 Members
72 Guides authored
