Sanyo SCP-6200 Screen Replacement
TechVid and one other contributor
Last updated on Mar 31, 2025
Views: 312
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 15
- Past 30 Days:
- 51
- All Time:
- 312
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓This guide will teach you how to replace the screen on a Sanyo SCP-6200
-
-
-
Remove the battery by pulling the switch on the phone’s rear side.
Ask FixBot
-
-
-
Remove the 5 Y000 Screws on the back of the phone. 4 Under the battery and 1 near the antenna.
-
Remove the plastic cover next to the antenna.
-
-
-
Use a spudger between the seams of the phone to detach the back panel from the rest of the phone.
-
-
-
-
Disconnect the top board and bottom board from each other.
-
-
-
Desolder the display cable from the top board
-
-
To reassemble your device, follow these instructions in reverse order.
