Samsung WB1100F Camera Flash Replacement
Jesse Lindsey and 3 other contributors
Last updated on Aug 29, 2016
Views: 1.1K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 20
- Past 30 Days:
- 97
- All Time:
- 1,105
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Needs More Images
A few more images would make this guide's procedures crystal clear.
Introduction
Go to step 1 ↓This guide provides instructions on how to replace the flash component of the Samsung WB1100F.
What you need
Tools
-
-
-
Remove six 1.2 mm Phillips #00 screws connected to the tripod dock and adjacent screws.
-
Remove six 1.2 mm Phillips #00 screws from the side of the camera.
Ask FixBot
-
-
-
Using the flat end of a spudger, loosen the connection between the back panel and the device. Remove the back panel using your hands.
-
-
-
-
-
Using the flat end of a spudger, loosen the connection between the top panel and the device. Remove the top panel using your hands.
-
-
-
Using your hands, remove the flash assembly. This should not require much force.
-
-
-
-
Using your hands, remove the top flash panel by pressuring down on the back to release a locking tab.
-
To reassemble your device, follow these instructions in reverse order.
Team
Metro State, Team 1-1, Carpenter SU 2016 Member of Metro State, Team 1-1, Carpenter SU 2016
MSU-CARPENTER-SU16S1G1
3 Members
60 Guides authored
