Samsung TL220 AF Assist Lamp Replacement
chelsa and 3 other contributors
Last updated on May 7, 2024
Views: 637
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 14
- Past 30 Days:
- 96
- All Time:
- 637
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Better Introduction
Improve this guide by completing or revising its introduction.
What you need
Tools
-
-
-
Begin with unscrewing the seven outside shell 4 mm Philip screws with the Philips screw driver.
-
Now carefully pry open the back casing with the ifixit plastic opening tool.
Ask FixBot
-
-
-
Now that you have the back casing off, gently remove the LCD screen up and to lay on top of the table to the right.
-
Next unscrew with the same screw driver, the 4 mm Philip screws on the back panel.
-
-
Tool used on this step:Tweezers$4.99
-
Unclip the four connecters that hold down the orange copper film strips with the plastic opening tool.
-
Then carefully pull out the three film strips with the ifixit tweezers.
-
-
-
Remove the 4 mm Philip screws located above the center film strip with the Philip screw driver. This will allow the top frame to come loose to take off.
-
-
-
Then pull the black claw located at the bottom right of the camera, to the right with the plastic opening tool. This holds the main plate down.
-
-
-
-
Slowly lift with your fingers, the top frame of the camera up, disconnecting it from the main piece.
-
-
-
This piece disconnected exposes the light bulb that you can change out at this point in the guide.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
