Samsung ST150F LCD Screen Replacement
Nicholas Pavao and 2 other contributors
Last updated on Jun 22, 2015
Views: 1.7K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 16
- Past 30 Days:
- 107
- All Time:
- 1,704
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 5 6
5 people have marked this guide "completed." Will you be next?
6 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
What you need
Tools
-
Spudger4.9
-
-
-
Remove these screws from the camera using a phillips head screwdriver.
Ask FixBot
-
-
-
Wedge a spudger/flathead screwdriver inside of the shell where the screws were to pry the shell off of the back.
-
-
-
-
-
Remove the Phillips head screw from the rear panel control board to reveal the LCD's connection to the motherboard.
-
-
-
-
Use a spudger to flip up the light gray lever(as shown in the photo). This will release the screen so that you may pull it out.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Team
UMass Dartmouth, Team 2-1, Shastany Spring 2015 Member of UMass Dartmouth, Team 2-1, Shastany Spring 2015
UMASSD-SHASTANY-S15S2G1
4 Members
48 Guides authored
