Samsung Refrigerator Ice Bucket (Ice Tray) Replacement
Matt Zieminski and 2 other contributors
Last updated on Jun 27, 2023
Views: 15K
View statistics:
- Past 24 Hours:
- 13
- Past 7 Days:
- 86
- Past 30 Days:
- 405
- All Time:
- 14,676
Comments: 5
1 comment on steps, 4 guide comments.
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
Introduction
Go to step 1 ↓If your ice bucket (aka ice tray, ice bin, or ice tub) is cracked, use this guide to replace it.
The ice bucket stores ice cubes for dispensing. The bucket assembly often includes an auger and a dispenser flap. It does not include the auger motor or dispenser actuator. If your fridge doesn't dispense ice, you may need to defrost this bucket.
This guide will work for with many refrigerator models. The photos in this guide are from a Samsung RF28R7201SG refrigerator. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.
What you need
-
-
-
Open both French doors for the refrigerator compartment.
Ask FixBot
-
-
-
-
-
Pull the ice bucket straight out of its housing and remove it.
-
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Ask our Answers Community for help.
Cancel: I did not complete this guide.
One other person completed this guide.
4 Guide Comments
Ice dispenser cracked.. Samsung french door refrigerator...can it be fixed
Used Testor’s non toxic model cement after cleaning the crack with alcohol.
Can't get the ice bucket to line up with the auger b
Gear
Can't get the ice bucket auger gear to line up with the motor arm.wont close.
