Samsung PL200 SD Card Replacement
Jacob Presnell and 8 other contributors
Last updated on Jan 15, 2026
Views: 1K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 22
- Past 30 Days:
- 111
- All Time:
- 1,012
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide will provide the user with the information needed to replace the SD card on a Samsung PL200 camera. A new SD card allows storage for photos and videos. The card’s speed can enhance the camera’s efficiency. Usually, replacing the SD card is due to maximum storage usage or wear and tear from the previous card.
-
-
-
Push the battery cover over to access battery/SD card compartment on the bottom.
-
Slide this button in the direction that the arrow is pointing to release and open the spring loaded battery/sd compartment door.
Ask FixBot
-
-
-
Once the battery/SD card compartment is opened, simply push the SD card down to activate the spring loaded ejector to raise SD card.
-
Use your fingers to remove the old SD card.
-
Close the battery/SD card compartment.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Clemson, Team 15-7, Shirley Winter 2015 Member of Clemson, Team 15-7, Shirley Winter 2015
CLEM-SHIRLEY-W15S15G7
5 Members
60 Guides authored
