Introduction
The screen is one of the more difficult parts of this laptop to replace, but it also is exposed and fairly fragile. Replacing the screen rather than the laptop could make an accidental drop into a much smaller problem.
What you need
-
-
Take out the four 4.5mm Phillips #0 screws located at the corners of the screen.
Ask FixBot
-
-
-
-
Unscrew each of the four 6.5mm Phillips #0 screws securing the screen to the case.
-
-
-
Using the black spudger tool and your fingertip, gently push on the ends of the ribbon cable to pop it out of the socket.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
USF Tampa, Team 2-4, Nance Fall 2016 Member of USF Tampa, Team 2-4, Nance Fall 2016
USFT-NANCE-F16S2G4
4 Members
5 Guides authored
